Home / Product / Folpet Fungicide / Metalworking Fluid Antiseptic / XK-MBM metalworking fluid antiseptic

XK-MBM metalworking fluid antiseptic Wholesale

XK-MBM metalworking fluid antiseptic

XK-MBM metalworking fluid antiseptic

Physical and chemical indicators:

Item Indicator
Appearance Colorless transparent liquid                           
Density (20℃, g/ml)                        1 .05-1.06
pH value (1% aqueous solution) 8.0-9.0
Content of active substance, % >92
Aldehyde content, % 15

XK-MBM is a morpholine derivative slow-release biocide, low toxicity, high efficiency and certain gas-phase bactericidal ability, suitable for a variety of humid environments to inhibit the growth and reproduction of microorganisms, to prevent spoilage and bad odors, to ensure the safe operation of the system.

N, N-Methylene-Bis-Morpholine MBM
Name: N, N'-methylenebismorpholine(MBM)
CAS: 5625-90-1
Chemical formula: C9H18N2O2
Appearance: Liquid
MBM Product Parameters:

Test  Item Quality Standard
Appearance Colorless or yellow liquid
pH 9.0-11.5
Specific Gravity g/cm3 1.050-1.075
Refraction coefficient 1.460-1.476

N, N'-methylenebismorpholine (MBM) is an efficient and environmentally friendly metalworking fluid bactericide used in metalworking fluids to prevent microbial contamination. MBM usually exists in the form of colorless liquid or solid, with a clear appearance and easy to store and transport. It does not have a pungent odor and is safer and more convenient to use. As a multifunctional chemical additive, MBM has a strong bactericidal effect and can effectively fight against a variety of bacteria and fungi, ensure the long-term stability of metalworking fluids, extend their service life, and reduce corrosion and scaling problems caused by microorganisms.

Highly efficient bactericidal effect: MBM can effectively fight against a variety of microorganisms, including bacteria, fungi, etc. It destroys the cell membrane and metabolic process of microorganisms, making them inactive and eventually dead, thereby preventing microbial contamination of metalworking fluids and avoiding problems such as corrosion, degradation and scaling.

Low formaldehyde content: MBM has an extremely low total formaldehyde content, which makes it less irritating to the skin when used and safer for use in industrial environments. Compared with other common fungicides, MBM poses less health hazards to workers and reduces the risk of exposure.

Environmental friendliness: MBM has low toxicity and good biodegradability. During use, it will not cause long-term pollution to the environment and can be decomposed into harmless substances over time. Compared with some traditional fungicides, MBM is considered to be environmentally friendly and is a preferred product in line with the concept of green chemistry.


Performance
XK-MBM is a biocide with excellent compatibility, miscible in both aqueous and oily systems, suitable for fully synthetic, semi-synthetic and emulsified metalworking fluids.
XK-MBM is a broad-spectrum, fast and efficient product with some gas-phase bactericidal ability, low total aldehyde content, low irritation and mild.
XK-MBM has a good bactericidal effect in the pH range of 6-11.
XK-MBM is a slow-release biocide, its slow-release effect gives the process a long-lasting antibacterial function, to prevent spoilage and odor generation, to ensure the safe operation of the system.

Application and dosage
XK-MBM is suitable for fully synthetic, semi-synthetic, and emulsified metalworking fluids. The product can be used in processing fluid concentrates as well as for on-site working fluid maintenance.
Recommended usage amount:
In metalworking fluid concentrates: 1-3% of the concentrate mass ratio;
Working fluid addition: 0.1-0.3% of the working fluid mass ratio
Please test the compatibility first during the use period.
Packaging and storage
The product is packed in 25kg, 200kg closed-end plastic drums.
The product name, specification, production batch number, net weight and factory name are marked on the drums.
The product should be stored in a dry and cool place. Under room temperature, it can be stored stably for 2 years.

Precautions
1. Operators must wear protective clothing, rubber gloves and eye protection and mask to avoid contact with skin, eyes and mucous membranes.
2. Once contacted with skin, wash immediately with plenty of water and soap; if splashed into eyes accidentally, wash immediately with plenty of water and buffer solution.
3. When the temperature is low, the product may appear crystallization phenomenon, a little heating can be dissolved, does not affect the use of the product itself performance.
Minimum order quantity
one ton

Nantong Boda Biochemistry Co.,Ltd.

Nantong Boda Biochemistry Co.,Ltd. is famous China XK-MBM metalworking fluid antiseptic manufacturers and OEM/ODM XK-MBM metalworking fluid antiseptic suppliers, specializes in producing preservatives,fungicides,and biocides for a wide range of daily products. The former of our company is Xinke Daily Chemical Company,which was established in 1999,and in 2003 it was renamed Nantong Boda Biochemistry Co., Ltd., but the trademark “XK” is still used. The XK brand has been known and used by the international manufacturers in the fields of cosmetics, construction, home decor, water treatment, textiles, cleaning products, and paper. The core products--wood protection and kathon based preservatives are widely used in many countries, the feedback from our clients are popularly positive. Our products kill and inhibit the growth of bacteria,mildew,and fungi, so your products could stay fresh for a long time.

News & Event

We have extremely complete and large-scale manufacturing capabilities, and can make customized products, OEM or ODM according to customer needs.

Industry knowledge

Contact Us

+86-13706276960

[email protected] 

+86-13706276960